SB-1300 Joint Stabilizing Sealer is a water-based, single component, acrylic co-polymer sealer and joint sand stabilizer. It can be used inside and outside, on old and new, horizontal or vertical surfaces to provide surface protection and stabilize newly installed joint sand in one application process. SB-1300 can be applied immediately after surface installation, as it is breathable and will not trap naturally occurring efflorescence. SB-1300 protects the surface from salts, acids and other corrosive chemicals as well as minimize overall surface weathering and deterioration.  On a newly installed or restored surface, SB-1300 will lock in its clean natural look and provide stain resistance which makes cleaning and maintenance easier.  SB-1300 is specially formulated with an antifungal designed to help inhibit the growth of mold, moss and algae on the sealer film.  It is non-hazardous and VOC/EPA compliant. SB-1300 has the consistency of water, is milky white when applied and dries clear with matte finish. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).

Surebond Joint Stabilizing Sealers can be used just as a sealer for pavers, concrete and other masonry surfaces without joint sand stabilization.

• Dual Purpose Product: Seals Surface & Hardens Joint Sand
• Antifungal Film Protection: Protects Sealer Film from Mold, Moss & Algae
• Stain Resistant: Promotes Easier Cleaning & Maintenance
• Stabilizes Joint Sand: Reduces Sand Washout, Weeds & Insect Infestation
• Clean Fresh Look: Locks in a Clean, Natural Look & Matte Finish
• Breathable, Immediate Application Water Based Sealer: Does Not Trap Moisture or Efflorescence

Coverage Per Gallon

Coverage based on one coat: Actual coverage may vary depending on the type, age, condition, porosity of the surface, application method and other local conditions such as temperature and humidity.

Tech Data Sheet (English)

Tech Data Sheet (Espanol)